This tapping machine will perform 1/2"-1" hot taps. This machine uses solid drill bits for performing the hot tap under pressure for branch connections of up to 175 psi @ 250 D. F maximum.
More Information . . .
Call us today! 951-223-5574
or email us
This tapping machine will perform 1/2"-2" hot taps. This package can be upgraded at any time to perform up to 6"
hot taps.
WT machine is rated for:
300 psi @ 100 deg F
250 Deg F @ 200 psi
available high temp packing to 495 deg @ 200 psi.
More Information . . .
Call us today! 951-223-5574
or email us
This tapping machine will perform 1/2"-4" hot taps.
WT machine is rated for:
300 psi @ 100 deg F
250 Deg F @ 200 psi
available high temp packing to 495 deg @ 200 psi.
More Information . . .
Call us today! 951-223-5574
or email us
This tapping machine will perform 1/2"-4, and is equipped with a very strong Air motor. This machine is designed for the NO SPARK applications on gas hot taps. This package can be upgraded at any time to perform up to 4"
More Information . . .
Call us today! 951-223-5574
or email us
Design eliminates any twisting or flexing under extreme hot taps. Allows the user to install the drive motor 4 different directions depending on the space or location of the hot tap! Different length Quad rails give the machine the ability to perform hot taps in tight locations.
More Information . . .
Call us today! 951-223-5574
or email us
Design eliminates any twisting or flexing under extreme hot taps. Allows the user to install the drive motor 4 different directions depending on the space or location of the hot tap! Different length Quad rails give the machine the ability to perform hot taps in tight locations.
More Information . . .
Call us today! 951-223-5574
or email us
Severe Duty 1/2"-4" Tapping machine 18" of travel, This machine is time tested and heavy duty! Can be used on Gas,water,steam and many other severe duty applications! also compatible for line stopping! Air and electric drives available. This machine comes with Packing wrench and D clips for installing Pilot drill/cutter mandrel. Extra High temp packing and parts in stock! 1450 psi@ 100 deg F 700 deg. F @ 700 PSI
More Information . . .
Call us today! 951-223-5574
or email us
Severe Duty 1/2"-8" Tapping machine. 28" of travel.,
This machine is time tested and heavy duty!
Can be used on Gas,water,steam and many other severe duty applications!
also compatible for line stopping! Air and electric drives available. This machine comes with
Packing wrench and D clips for installing Pilot drill/cutter mandrel. Extra High temp packing and
parts in stock!
1450 psi@ 100 deg F
700 deg. F @ 700 PSI
More Information . . .
Call us today! 951-223-5574
or email us
3in-12in Quad Rail Tapping Machine This machine performs 3"-12" under pressure taps Hydraulic, Air or Electric drives available Gear driven for the ultimate in performance and reliability
More Information . . .
Call us today! 951-223-5574
or email us
3in-16in Quad Rail Tapping Machine Package This machine performs 3"-16" under pressure taps 40" of overall travel Hydraulic or electric drive Gear driven for the ultimate in performance and reliability
More Information . . .
Call us today! 951-223-5574
or email us
12in-24in Quad Rail Tapping Machine This machine performs 12"-24" under pressure taps Use Hydraulic or Electric drives on the same machine depending on what you need.
More Information . . .
Call us today! 951-223-5574
or email us
These items are Installed on this line of Power Units.
This hydraulic power pack is the perfect unit for our line of smaller 3"-12" hydraulic tapping machines Add a wheel package and make it a portable unit!
More Information . . .
Call us today! 951-223-5574
or email us
24 H.P Honda heavy duty series 15 GPM @ 2000 psi.
This model power pack is used for our medium sized hot tapping machines 4"-16".
Many different GPM and Pressure ratings available, please call and we can customize any power pack to fit your needs.
More Information . . .
Call us today! 951-223-5574
or email us
25 Horse Power Diesel Hydraulic Power Packs 25 HP Kubota Liquid Cooled Diesel Engine E.P.A TIER 111 Exhaust Emission Compliant 4-Stroke Diesel Power Pack Direct Fuel Injection 12 Gallon Fuel Tank
More Information . . .
Call us today! 951-223-5574
or email us
35 Horse Power Diesel Hydraulic Power Packs 35 HP Kubota Liquid Cooled Diesel E.P.A TIER 111 Exhaust Emmision Compliant Liquid-Cooled 4-Stroke Diesel Power Pack Direct Fuel Injection 25 Gallon Fuel Tank
More Information . . .
Call us today! 951-223-5574
or email us
8 GPM @ 2000 psi. This hydraulic power pack is perfect for indoor hot tapping or other applications. Pair this up with our 3"-12" hydraulic tapping machine and tap anywhere indoors!
More Information . . .
Call us today! 951-223-5574
or email us
28 GPM @ 2000 PSI This unit is designed for our larger custom line of tapping machines for indooe use.
Can be made with a skid type of mounting paltform or a custom cage for crane lifting.
Please call for a custom quote and design spec
More Information . . .
Call us today! 951-223-5574
or email us
28 GPM @ 2000 PSI This unit is designed for our larger custom line of tapping machines for indooe use.
Can be made with a skid type of mounting paltform or a custom cage for crane lifting.
Please call for a custom quote and design spec.
More Information . . .
Call us today! 951-223-5574
or email us
These saddles/sleeves are specifically designed for use on copper mains.
Our saddles can be used on domestic water, heating hot water, Air, natural gas, glycol and sewage mains. All saddle have a stainless steel IP male thread for easy installation of you full port ball valve. Please call with any questions and we will gladly help you pick the correct saddle for your application.
More Information . . .
Call us today! 951-223-5574
or email us
These saddles/sleeves are designed specifically for steel and pvc mains They can be used on domestic water, heating hot water, Air, natural gas, glycol and sewage mains. All saddles have a stainless steel IP male thread for easy installation of you full port ball valve. Please specify main size and outlet size when ordering.
More Information . . .
Call us today! 951-223-5574
or email us
3/4"-4" linestop fittings. Each fitting comes with completion plug and cap 300 psi max rating
More Information . . .
Call us today! 951-223-5574
or email us
1/2" & 3/4" thermowell fittings are designed to be welded onto steel mains. This fitting allows a well to be installed into a live main under pressure. The fitting is welded in place you can install a ball valve or gate vale on the outside of the fitting. Once the hot tap is performed you close the temporary ball valve or gate valve and remove the WT-3/4-2" Tapping machine.
More Information . . .
Call us today! 951-223-5574
or email us
Full Wrap hot tap fittings are designed to be welded onto CMLC pipelines for structural support on the thin walled steel pipe. we start off with our standard ANSI 150 lb flanged hot tap fitting and design a wrapper to be installed and welded to give support during and after the hot tap.
More Information . . .
Call us today! 951-223-5574
or email us
Contoured Hottap We build contoured Weld fittings designed for ANSI 150 lb and ANSI 300 lb.flanged connections.
More Information . . .
Call us today! 951-223-5574
or email us
We offer Custom weld fittings for hot taps All of our weld nozzle fittings are designed and hand made to ensure proper installation with most fittings built off of ANSI 150 or ANSI 300 lb carbon steel flanges or stainless steel.
More Information . . .
Call us today! 951-223-5574
or email us
High speed holesaws with a standard backing plate In addition We also Offer custom heavy duty carbide,diamond and tool steel holesaw cutters for most sizes 2 1/2"-60" and larger if needed.
More Information . . .
Call us today! 951-223-5574
or email us
Carbide holesaws with a standard backing plate In addition We also Offer custom heavy duty carbide,diamond and tool steel holesaw cutters for most sizes 2 1/2"-60" and larger if needed.
More Information . . .
Call us today! 951-223-5574
or email us
Carbide tipped Holesaws designed for use with our Line of Hot tapping machines Water works Tools line of double toothed hot tapping cutters can be made in any sizes and depths for line stopping to hot tapping. all of our cutters featured a brazed in carbide segments for long life and exceptional performance. All of our holesaws can be returned for repair and installation of new carbide cutting segments.
More Information . . .
Call us today! 951-223-5574
or email us
Double Stack Holesaws come in either carbide tipped or high speed steel. These
custom made holesaws have about 3.25" cutting depth with a heavy duty 3/16" thick steel backing plate. Please specify high speed steel or carbide tipped when ordering. if you do not see a size you need please call as we have the ability to build almost any size! Other options available are triple stack and custom depths.
More Information . . .
Call us today! 951-223-5574
or email us
PVC carbide tipped cutters These cutters are specifically designed for cutting through Plastic or PVC pipe. Extra deep reliefs assure the chips are pushed out and do not bind up the cutter.
Many different backing plate designs available for all types of tapping machines. Please call to get your custom quote today.
More Information . . .
Call us today! 951-223-5574
or email us
3/4"-24" PVC Plastic Deep Carbide Tipped Cutters These cutters are specifically designed for cutting through Plastic or PVC pipe. Extra deep reliefs assure the chips het pushe out and do not bind up the cutter.
More Information . . .
Call us today! 951-223-5574
or email us
Tool Steel Hole Saw Cutters Product images and information coming soon.
More Information . . .
Call us today! 951-223-5574
or email us
These Cutsom Carbide tipped Holesaws can be customized to fin your type of hot tapping machines. Water Works Tools can take your blue prints and manufracture a double toothed hot tapping cutter made in any sizes and depths for line stopping to hot tapping. All of our cutters featured a brazed in carbide segments for long life and exceptional performance.
More Information . . .
Call us today! 951-223-5574
or email us
Our 1/2"-6" pilot drill bits are designed to catch the coupon or slug you have cut out of the pipe. Our pilot drill bits have dual holes in the flutes so you can run 2 sets of retention wire to ensure 100% positive retention of the coupon.
More Information . . .
Call us today! 951-223-5574
or email us
Pilot Drills are specifically made for our line of larger hot tapping machines. 3"-24".The pilot drills are designed with the retention wires or keepers to catch the coupon. we designed the pilot drill with optional holes in the main body do so you can set the depth of the pilot in the cutter depending on the size of hot tap.
If you need custom sizes for your machine please call and we'll be glad to help!
More Information . . .
Call us today! 951-223-5574
or email us
4" & 6" 150 lb. threaded flanged adaptors designed to be used with our WT-3/4"-6" line of tapping machines.
More Information . . .
Call us today! 951-223-5574
or email us
High pressure machines 150 lb. 300 lb. 600 lb. These adaptors are designed for use with our Severe duty Tapping machines 1/2"-6" line of machines.
More Information . . .
Call us today! 951-223-5574
or email us
ANSI 150 lb adaptor aso drilled for MJ bolt holes 3/4" testing/blow off port
More Information . . .
Call us today! 951-223-5574
or email us
Our custom line of retention style drill bits are designed to catch the coupon or slug you have cut out of the pipe. Our pilot drill bits have dual holes in the flutes so you can run 2 sets of retention wire to ensure 100% positive retention of the coupon.
Pilot Drills are specifically made for our line of larger hot tapping machines. 3"-24".The pilot drills are designed with the retention wires or keepers to catch the coupon. we designed the pilot drill with optional holes in the main body do so you can set the depth of the pilot in the cutter depending on the size of hot tap. If you need custom sizes for your machine please call and we'll be glad to help!
Most durable tapping machines on the market These tapping machines offer lifetime phone support so that when you purchase your machine you have the support needed to succeed in your tapping business. Please call us for supports...
Our pilot drill bits will catch your coupon. All you have to do is order our drill bits and we will provide the support on all your pilot drill bit accessories.
Our company is built around the belief of suppying the correct tools and support needed for your company to be able to perform your job and be successful in all of your hot tap, linestopping and pipefreezing needs. Call today and we will be happy to help you get started in choosing the correct tools for you job. 951-233-5574
Contact us
Tapping saddles delivered to your jobsite so you can perform critical hot taps or linestops. We offer hot tap saddles for copper, steel, pvc, ductile iron, cmlc and many other pipelines. Call today or email and we can help guide you through the process of picking the correct hot tap or line stop saddle to meet your needs the first time!
Learn more